[. . . ] In case the base plate can't be tensioned anymore after frequent adjusting, the base plate setting mechanism can be re-adjusted. 5, 5 m/s2 Typical A-weighted sound levels: Sound pressure level (K = 3 dB(A)) . [. . . ] It is recommended to wear gloves, sturdy non slipping shoes and apron. Sawdust and splinters must not be removed while the machine is running. Always disconnect the plug from the socket before carrying out any work on the machine. Dust that arises when working on wood or using the tool on industrial material can be dangerous to health. Plunge cuts without pre­drilling a hole are possible with soft materials (wood, light building materials for walls). Harder materials (metals) must first be drilled with a hole corresponding to the size of the saw blade. We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents: EN 60745, EN 55014­1, EN 55014­2, EN 61000­ 3­2, EN 61000­3­3, in accordance with the regulations 98/37/ EC, 2004/108/EC It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. mAINTENANCE The ventilation slots of the machine must be kept clear at all times. Should components need to be exchanged which have not been described, please contact one of our AEG service agents (see our list of guarantee/service addresses). As well as the machine type printed on the label and order the drawing at your local service agents or directly at: AEG Elektrowerkzeuge, Max-Eyth-Straße 10, D-71364 Winnenden, Germany. [. . . ] In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. Får endast anslutas till 1-fas växelström och till den spänning som anges på dataskylten. [. . . ]